LED Studio 876 BS by walimex pro walimex pro LED Studio 876 BS - Fluorescent light emitting diode for use in photography and videography.
IN THE BOX
LED Studio 876 BS by walimex pro walimex pro LED Studio 876 BS - Fluorescent light emitting diode for use in photography and videography. With a very high illuminance, a flexible intensity range and a robust housing, the LED Studio 876 BS by walimex pro is perfect for on-location and studio, whether in the photo or video area.
876 high-performance LEDs The surface -mounted luminaire has 876 high-performance LEDs, which provide daylight with approx. 5600 Kelvin for authentic light. This allows an enormous illuminance of about 3000 lux to reach a distance of one meter. The wide beam angle of 60 degrees leads to a uniform and homogeneous illumination. All LEDs are carefully checked and selected in a selection process, ensuring the perfect color balance for each luminaire. The high CRI of over 88 allows for accurate color reproduction.
Stepless light output of 10-100% via a dimmer on the back of the LED Square, the light output can be continuously adjusted between 10 and 100 percent. The light stays flicker-free regardless of the power or the color temperature, especially in the video area this feature is very important.
Adjustable color temperature range The color temperature is almost infinitely adjustable from approx. 3200 - 5600 Kelvin. The light characteristic can be further adapted and changed by diffusion disks and filters.
Slide-in filters and swing gates To the scope of supply of the video u. Photo panel light includes a transparent diffusion filter that can be attached to the surface light as a diffuser. This homogenizes the individual LED and results in a uniform and soft light appearance. To control the light in its color temperature, the set includes a warm tone filter. The removable hinged gates are robust and the best tool to effectively control the radiation behavior. In addition, the swing gates protect against bumps and damage.
Mounting on tripod and camera The LED surface light can be adapted to a ball head via a ¼ inch thread and can therefore be flexibly adjusted in the tilt angle. The ball head also has a ¼ inch thread and an additional hot shoe holder, so the light can also be positioned frontally on the camera.
Power Supply Power is supplied directly from the AC adapter or NP-F 750 batteries. The power indicator is displayed via an LCD panel on the back of the video and photo light.
Theme by InStijl Media