The mantona Alto 214 tripod is made from light, yet sturdy and robust aluminium. This choice of material means it is also suited to long, intense periods of use.
Sturdy construction combined with huge maximum working height The mantona Alto 214 tripod is made from light, yet sturdy and robust aluminium. This choice of material means it is also suited to long, intense periods of use. The centre column with crank handle and precise fine-cut thread enable you to make very fine adjustments. The maximum working height of this tripod comes to a huge 214 cm (without the head).
Stable thanks to the additional centre column The centre column is fitted with a 1/4 inch thread so that head and panheads can be attached. Using an 1/4 to 3/8 inch adapter, which can be obtained separately, 3/8 inch devices can, of course, also be connected. Using clamp quick-locks, you can set up the tripod quickly and securely on any ground surface, whether in the studio or outdoors. The necessary stability is always ensured thanks to the mid-spreader and the solid construction of this tripod.
Maximum load-bearing capacity of at least 4 kg The officially stated maximum load-bearing capacity of this tripod is 4 kg. This value is kept conservatively low because of the extremely high, maximum working height of 214 cm. In normal practical use, a heights of lower than the dizzy height of 214 cm, and without the lever action of heavy equipment, for example a large telephoto lens, this tripod can easily take considerably more weight.
A transport bag with an additional external pocket already included as standard.
Theme by InStijl Media