Wireless 2.4GHz wireless remote control, control for Walimex pro Studio Battery Flash2Go and Light Shooter TTL up to 100 m distance
Reliable control and lightning-fast tripping The W1 TTL radio remote control is tuned to Canon cameras with TTL function. It can control flashes that have the Walimex per W1 receiver system installed (eg Light Shooter 360 TTL, Flash2Go 600 TTL) directly via radio (2.4 GHz). The camera with W1 radio remote control controls the exposure fully automatically in TTL mode without the need for manual adjustment. With the wireless shutter release Walimex pro W1 TTL, the data is transmitted to the flash or several flashes at lightning speed and these are adjusted accordingly and triggered with minimal delay. The maximum synchronization time is 1 / 8.000 seconds (achievable with a maximum shutter speed of the camera of 1 / 8.000 seconds). If a slightly different exposure is desired in TTL mode, the exposure can be manually adjusted three stops up or down (in one-third increments). Also a multiple exposure series is possible. Thus, based on the TTL measured values, an underexposed, a normal-exposed and an overexposed image are created, from which the appropriate one can then be selected. The wireless shutter release W1 TTL TS simultaneously controls up to 6 flash groups (with one or more flashes).
Fully automatic or manual settings As an alternative to fully automatic TTL exposure, you can also individually control the flash output using the W1 radio control. Each flash, or each flash group can be controlled individually, so that they can easily set even difficult to reach flashes during the shooting. In addition to the manual mode, the radio remote control also supports the Multi mode (strobe function). All relevant parameters such as the number of flashes, frequency and power can be controlled via the remote control. The maximum supported synchronization time is 1 / 8.000 seconds (achievable with a maximum shutter speed of the camera of 1 / 8.000 seconds). Exposure is possible at appropriate shutter speeds on the first or second curtain.
Intuitive to use The remote control requires 2 standard AA batteries or rechargeable batteries (not included in delivery). A clear display makes it easy to set the important parameters. The settings are simple and, to a large extent, intuitive. A detailed manual (German and English) also helps with tricky photo shoots.
Tested camera models The remote control works with the following tested Nikon DSLR cameras: D4S, Df, D4, D810A, D750, D810, D610, D600, D800 / D800E, D700, D300S, D300, D7200, D7100, D7000, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D3000, D90, D200, D100, D80. If your model is not listed here, we recommend a self-test and possibly a USB firmware upgrade.
Theme by InStijl Media