Paul C. Buff AlienBees Studioflitser

€279,95

Incl. btw

Beoordeel nu

The AlienBees™ are powerful, fast, accurate and versatile, with easy-to-use analog controls. The AlienBees™ self-contained studio flash units are available in three output models and five bold colors.

Maak een keuze: *

In winkelwagen

Merk:	Paul C. Buff
Artikelnummer:	B400AlienYellow
Levertijd:	Pre-order Levering (22-11-2018)

AlienBees Flash Unit
6 f-stop power variability (5 Ws to 160 Ws)
Continuous slider adjustment from full to 1/32 power
Internal cooling fan for heavy duty use
WYSIWYG modeling previews
Standard 120 VAC, 50-60 Hz power requirements
2-Year Factory Warranty
Make a choice: B400, B800, B1600

IN THE BOX

AlienBees Yellow
7 in. silver field reflector
Protective shipping cover
150W modeling lamp
Flashtube
Down-Angle 15 ft. Power Cord
Standard 15 ft. sync cord (1/8" to PC)
Light Stand Mounting Block
AlienBees™ Product Manual

PRODUCT INFORMATION

Perfect For: Students, Hobbyists, Beginners and Beyond

Sync Cord Compatibility: All Paul C. Buff, Inc. flash units arrive with a 15' sync cord for connecting to a camera's PC sync terminal. Not all camera's are equipped with a PC sync terminal. If you plan on using this cable, and not wireless remotes, you may need a hot shoe adapter. Check your camera's compatibility.

Find out how the AlienBees™ compares to our other flash models.

AlienBees™ B400	AlienBees™ B800	AlienBees™ B1600
Wattseconds	160 Ws	320 Ws	640 Ws
Power Variability	6 f-stops (full to 1/32)	6 f-stops (full to 1/32)	6 f-stops (full to 1/32)
Recycle to Full	0.5 sec.	1 sec.	2 sec.
Flash Duration (t.5)	1/1600 sec. (at full power) 1/3000 sec. (at 1/32 power)	1/3300 sec. (at full power) 1/1650 sec. (at 1/32 power)	1/1800 sec. (at full power) 1/900 sec. (at 1/32 power)
Flash Duration (t.1)	1/2000 sec. (at full power) 1/1000 sec. (at 1/32 power)	1/1100 sec. (at full power) 1/550 sec. (at 1/32 power)	1/600 sec. (at full power) 1/300 sec. (at 1/32 power)
Power Requirements	120 VAC, 50-60 HZ
Average Current Draw	6 amps average
Sync / Trigger Voltage	Less than 6 volts
Modeling Lamp	150W max.
Flashtube	14mm flashtube (daylight-balanced and UV-coated)
Stand Mount	Fits stands up to 5/8"
Umbrella Mount	Accepts umbrella rods up to 9mm
Weight	2.5 pounds	2.9 pounds	3.7 pounds
Dimensions	8.5 in. (length) x 7.875 in. (height) x 5.75 inches (width)

Dimensions Note: length measurements taken from the front of the shipping cover (in place on the unit’s faceplate) to the back panel; height measurements taken from the top of the umbrella screw to the bottom of the light stand top coupler, folded back underneath the unit; width measurements taken from side to side at the widest points

Specificaties

0 sterren gebaseerd op 0 beoordelingen

Uw review toevoegen

Theme by InStijl Media

Paul C. Buff AlienBees Studioflitser

IN THE BOX

PRODUCT INFORMATION

You may also like