Anti-twistbeveiligingsset klein. Deze set bestaat uit walimex pro DSLR zwenkarm Magic 18 en walimex pro zwenkarm anti-twist beveiligingsapparaat. De Walimex pro zwenkarm-beveiliging tegen verdraaien voorkomt dat de zwenkarmen losraken.
This set consists of walimex pro DSLR swivel arm Magic 18 and walimex pro swivel arm anti-twist safeguard device. The walimex pro swivel arm anti-twist safeguard prevents the swivel arms becoming loose becoause of the lever action on the joint between 1/4 inch screws and the holes.
Simple and safe assemblyThe lower part of the anti-twist safeguard can be attached simply with two 1/4 inch screws (provided) to a rig or cage. The adapter is made so that the swivel arm can be attached to other surfaces, if desired, such as to wood or concrete. Two elongated holes ensure that the holes can be spread at varying distances from each other. The swivel arm is screwed into the 1/4 inch inner thread of the anti-twist safeguard using its 1/4 inch threaded bolts an can also be fixed with the wing bolt provided.The upper part of the anti-twist safeguard is fixed in place once the swivel arm has been screwed in using an Allen key, too. An Allen key has been provied. Accessoires that have to assembled on the swivel arm are placed on the accessory slot, and simply attached using a 1/4 inch screw.It is no longer necessary to lavoriously screw the accessories on to the swivel arm. The screw has recesses so that it can be tightened with the Allen key. Additionally, a rubber plate on the accessory slot prevents slipping.
Made in GermanyThe walimex pro swivel arm anti-twist safeguard was designed and made in Germany with the utmost level of precision. Continuous quality inspections ensure the very best quality and durability, even when used continuously in tough conditions.
Theme by InStijl Media