De walimex pro audioadapter is een 2-kanaals XLR-adapter met voorversterker en fantoomvoeding. Ideaal voor alle DSLR-camera's met een geïntegreerde microfoonaansluiting Een scherm toont optische bewaking van de geluidsopname.
The walimex pro audio adapter is a 2 channel XLR adapter with pre-amplifier and phantom power. Ideal of all DSLR cameras with an integrated microphone socket A display shows optical monitoring of the sound recording. There is also a wide range of settings to optimise the sound quality. The audio adapter can be attached simply from below via a 1/4 inch thread to the camera.
FunctionsLCD Display: Level status display in dBGAIN switch: Signal amplifier, low to high _xDB47_ PEAK switch: On/off switch of the LED signal displays. LEDs flash red in the event of overload Monitor PLAY/REC switch: Play for headset - playback of camera audio signals. REC for headset - recording of audio signals during recording AGC on/off switch: when activated (on), the output level of the camera is kept constant. Note: Function only possible with AGC cameras. Read the manual for your camera to learn more about this.M/S switch: to select mono (M) or stereo (S) output mode POWER switch: On/off switchPHANTOM 12 V/48 V switch. For 12 or 48V condenser microphones. Note: Most microphones use 12 V. Read the manual for your microphone to learn more about this.LINE/MIC/PH switchLINE mode is for amplifiers and other audio devices with a line output. The signal is reduced to approx. 40dBMIC mode is for self-powered microphones PH (phantom) mode is for microphones with a pH value that require a phantom setting.
Theme by InStijl Media