Walimex Pro LED Ringverlichting Medow 960 Pro Bi Color

Illuminate portraits and videos professionally
With the LED ring light Medow 960 Pro Bi Color you can illuminate your portrait shots like a pro: As you take your picture with the camera through a ring of light, light from all directions falls on your motif from this camera perspective. That means minimal shadows, no edges, soft light and therefore a very unique aesthetic. You can use the ring light right out of the box, all you need is a lamp stand with the standard 5/8 inch spigot to set it up. With the included mini-spigot and smartphone holder, you'll be ready to start taking photos and videos right away.

Enjoy first-class quality
The 96 Watt light with its excellent colour rendering index (CRI) of =95 Ra is adjustable in colour temperature from 3,200 (artificial light) to 5,500 Kelvin (daylight). You can adjust the colour temperature in steps of 10 degrees. In addition, it is dimmable from 0% to 100% in brightness. The two NP-F battery slots ensure independent working: These enable you to use the lamp even when far away from the mains (batteries not included). The built-in diffuser provides soft, flattering and almost shadowless light with a luminous flux of up to 5,300 lumens. The flicker-free light allows filming even in slow motion.

Full control at all times
For detailed settings on the ring light you can use the supplied remote control or one of the two control buttons (1x on the front, 1x on the back of the device). This is extremely convenient and helpful, especially in practical use. The selected values are always very easy to read on the illuminated displays on the device and the remote control. Six different groups and 50 channels give you full control even when using several lights. The Medow 960 Pro Bi Color is a large ring light with an outer diameter of 45 cm and an inner diameter of 30 cm. This allows the use even with larger motifs and makes it easier to place recording devices such as cameras or smartphones inside the ring light.

Versatile holders included
The ring light features an steplessly tiltable tripod holder. Thanks to the 16mm spigot (5/8 inch) spigot connection the ring light can be attached to any standard lamp stand. A camera can be mounted on the supplied ball head and also the recording with an iPhone or Smartphone is always possible thanks to the included mobile phone holder. Here you are very flexible in the placement of your equipment due to two cold shoes (1x in the middle of the lamp, 1x on top of the housing). For example, a separate microphone can ideally be placed in the upper hot-shoe holder, while your recording device is centrally located in the middle of the ring light. There you can also attach the mirror and use the light for make-up. But you can also take free hand pictures through the middle of the lamp.